Eero Blinking White

Why is My Eero Blinking White: How to fix eero Flashing White

If you want to set up a mesh network at home, Eero is one of the better networking options. Even though this system does a pretty good job, it can sometimes have problems, just like any other networking gear. One of the things we’ll talk about in this article is why the eero blinking white and what to do to fix it.

What Does It Mean When Eero Blinking White?

You can’t miss the one LED light on your Eero if you look at it. It shows the router’s current status and if everything is working right. This eero LED light changes colors based on the status of the router.

This LED light should be solid white when everything is fine. If you see a white light blinking on your Eero, it is starting up or connecting to the Internet. Normally, this shouldn’t last too long, but some users have said that their Eero has constantly been blinking white for a long time and not connecting to the network.

How to Fix the White Light on the Eero?

Sometimes the router’s signal is too weak to set up a normal connection. Your ISP needs to look into this and fix it. When your ISP is doing scheduled maintenance or has a service outage for some other reason, there is usually either no signal or a weak signal. This can cause the router to send out a weak signal, so your eero flashing white as it tries to connect to the internet over and over again.

You can only fix this problem by calling your Internet service provider and asking if there are any problems with their service. If they are having service problems or are doing maintenance, all you can do is wait until they are fixed. Most of the time, these problems don’t last too long.

But if the problem isn’t with your ISP, you can try the next step.

Take out and replace the troublesome Eero

If an Eero isn’t working right, you can quickly fix it by removing it from the app and then adding it back. This has been shown to work for some connection problems. You can add and remove Eeros from your network by following this guide.

Recharge your Eero

Power cycling the Eero is a simple, straightforward process that will fix any networking problem you might be having. It’s often used because it’s easy, and here’s what you need to do.

Pull the Eero’s power cord out of the wall.

Wait 30 seconds.

Plug it back into the power source and wait for it to start.

If this doesn’t stop the eero blinking white light, go to the next step and soft reset the Eero.

Start your network back up.

When we say “restart the network,” we don’t just mean “restart the router or the modem.” The router, the modem, and the Eero are part of the network. We want to turn off and on all of them.

First, unplug the Eero from its power source. Then, wait 30 seconds and plug it back in. After 2 minutes, it will be stable.

Then unplug the modem from where it gets power. After 30 seconds, plug it back in and wait until all the LED lights are steady.

Now, look to see if the white light is still flashing.

Set up your Eero (Soft Reset)

The next thing you can try to fix the eero light blinking white is a soft reset. Unlike the factory reset procedure, it will keep the settings you have made on the Eero.

Find the button on your Eero that resets it.

Hold it for 5 to 10 seconds until the eero blinking yellow. When that happens, let go of the button.

Wait a little while until the red LED light stays on.

But if it keeps blinking, you can reset the Eero to how it was when it was first made.

Return Eero to its original settings

We recommend returning the Eero to how it was first made as a last resort. The factory reset removes the Eero from your home network and deletes all the settings and configurations.

Find the button that resets the device.

Press it and hold it down for about 15 seconds or until a red light starts flashing.

Put the button down.

After the factory reset, the Eero’s blue light will blink. This means that you can start over and set it up again.

Is Eero Secure worth the money?

Change the eero SSID and Wi-Fi password. Get in touch with Eero Support.

If none of the above solutions worked to fix the Eero Blinking White, the last thing you could do is visit eero dashboard page. Users have said that they are very helpful and quick when it comes to fixing Eero problems. And if they can’t help you select the problem, you may be able to get a new one if the warranty is still valid.

Leave a Comment

Your email address will not be published. Required fields are marked *