If your Eero has been acting up lately, and you want to know how to reset it, read on. Resetting it is easy peasy, though. You have to push a button, and everything is done. Two ways to factory reset eero router are soft reset and hard reset. All advanced settings and other data are saved when you do a soft reset. A hard reset, on the other hand, deletes all custom settings, data, and network settings.

Before factory reset eero, you must choose a method with care. If you’ve decided, let’s go.

How to reset softly

A soft reset deletes all network settings but keeps other data and settings. You can save sessions and advanced settings like IP reservations and port forwarding configurations.

The Eero device can also stay connected to the network. So you won’t have to start over with the setup process of eero factory reset.

Here’s what you need to do to soft reset your Eero:

• Find the button on your Eero that resets it.
• Hold the button down for 5–10 seconds.
• When the LED flashes yellow, let go of the button.
• Wait 5–10 minutes until the LED lights up eero white light all the way through.
• Check your eero app when the reset is done. You should see a green border around a white circle.
• To make your device work better, you should do a soft reset. A soft reboot saves you time and extra steps you don’t need to take.

How to Hard a restart

A hard reset takes your device back to the way it was when it was first made. It removes all network settings, configurations, and other data. It takes how to factory reset eero off the network as well.

Here are the things you need to do to  eero hard reset:

• Find the button on your Eero that resets it.
• Hold the button down for 15 seconds.
• When the red LED status light starts blinking, you can let go of the button.
• Wait for a few minutes until the process is done.
• If the Eero blinks a blue light, the process is finished.
• After a hard reset, you can start setting up the device. This is the best way to reset your Eero if you’re going to sell it or if a soft reset didn’t fix the problem.

Power a router back on

A power reset is another way to reset, like a soft reset or an eero hard reset. If a soft or hard reset doesn’t fix the problem, you should try this reset.

Here’s how to do a power reset, which works the same way as a soft reset.

• Unplug your Eero Router from its power source, whether the wall or its battery.
• Hold on for ten seconds.
• Connect the Eero Router back to the power source and turn it on.
• When you turn off the computer, the active memory is cleared, but the software stays the same. When you turn it back on, it will start with a new memory, and your software will work better.
• Here’s how to do a power reset, which works the same way as a hard reset.
• Hold the reset button with a paperclip for 30 seconds to make the LED light flash.
• If you still have your finger on the reset button, unplug the power cable or any other power source. Wait another 30 seconds, too.
• Plug in the power cord again while holding down the reset button.
• This one will erase all your network settings and saved sessions like a regular hard reset. But it can get rid of bad memories that are hard to get rid of with a hard reset.

How to Use the Eero App

Here’s how to use the Eero app to restart your Eero Router.

• On your phone, open the Eero app. Here’s a link to get the app for Android and iOS.
• Find the “Menu” button in the top left corner of the screen and click it.
• From the menu, choose “Network Settings” and “Advanced Settings.”
• Click “Delete” to get rid of your network, and then read the warnings that appear.
• Below the warnings, click “Delete Network.”
• “Are you sure you want to delete your network?”
• Will show up. Last but not least, click “Delete Network” to confirm this warning.
• It will take you back to the page where you set up the router so that you can start over.

The End Result

Mesh systems are made to be easy to use. Now you know how to factory reset eero. It makes your WiFi network reach more places. You and your family won’t have to drive at slow speeds. So, you should take good care of your Eero router.

In an ideal world, it should be easy to reset your Eero. But if your device is still giving you trouble visit dashboard.eero, you should call Eero’s customer service.