We decided to adopt a simpler approach in this connected world full of usernames and passwords. The eero app is your doorway to configuring, tweaking and monitoring your eero network. To access the eero app, you need just to enter your mobile phone number or an email address associated with your account rather than remembering a separate eero login and password. After that, the app will provide you with a one-time access token, eliminating the need to reset eero password.
Your Default Credential
If you’ve been following along, you should now have one credential verified as part of the registration process for your eero network (most likely your email address). Although this is the only credential you’ll need to access the eero app and keep an eye on your network, it’s a good idea to validate your secondary credential (often an email address) just in case.
In what way is it necessary to check?
It’s not unheard of for one credential to change in your life, and having a second key to unlock the door, so to speak, can make your experience with eero that much smoother. This is especially true if you switch mobile carriers and subsequently change your phone number or reset eero password for your old email account. The verification process only takes a minute and is remarkably similar to the steps you take when setting up your network and logging into the app.
Access your account details by accessing the Settings menu on iOS and selecting Account. Here’s what your screen might look like:
A prompt requesting you to verify your account information or eero reset password will appear if the phone number or email address is not confirmed. Please double-check the accuracy of the provided information before proceeding with the verification code sent to the phone number or email address by tapping on the data in question.
Once you have the verification code, type it into the field and click the “next” button.
A word on codes
Depending on your mobile service provider or email service provider, you may delay receiving your verification code. Don’t worry if you don’t get a code immediately; it should arrive within a few minutes. If you’re waiting for a verification code and it seems to be taking too long, check your network connection and try again.
reset eero password(s) is a valuable troubleshooting procedure common to all routers. Simpler measures, such as removing your eero’s power cable, waiting 30 seconds, and then plugging it back in, are usually recommended before resorting to a reset.
A hard reset of your eero can be performed in one of three ways: through the eero app (instructions available here), by pressing the tiny reset button on the back of the device (1st generation), or by pressing the reset button on the rear of the device (2nd generation) (eero). The eero Beacon has a reset button on the left side, which you can use in the same way described below. Make sure your eero has been on for at least 45 seconds before attempting a reset.
There are two different uses for the reset button.
Resetting to factory settings
When you perform a soft reset on your eero, all your network settings will be deleted, but your sessions will remain intact. This allows you to maintain your Eero on your network and save its logs and other sophisticated settings, such as IP reservations and port forwarding.
You can perform a soft eero wifi password reset by pressing and holding the reset button for seven seconds, at which point the device’s LED will begin flashing yellow. Your eero’s LED light should turn on eero blinking white again, and the eero app’s outline should turn green after a short while.
A gentle reset option is not available in *Ring alarm Pro. How do I reboot my Eero or network? Holding the reset button for 1 second in the app will give you the rundown.
The eero can be completely disconnected from your network, its session and logs deleted, and its settings reset by performing a hard reset. If the eero is connected to the internet, disconnecting it from your network using the eero app has the same effect.
An important thing to remember is that if you hard reset your gateway eero (the one attached to your modem or upstream device), you will delete your whole network and all of your settings. If you need to reset only one eero hard, we advise using a different eero as a gateway.
To do a hard reset on your eero, press and hold the reset button for 15 seconds, during which time the LED will glow red. When an eero hard reset is complete, the LED indicator will begin flashing blue, indicating that it is ready to be set up anew.
Performing a complicated how to reset eero password on a Ring Alarm Pro will also perform a factory reset on the Ring alarm system. All Z-wave devices linked to the Ring will also be reset.